Description 3Doodler 1.0 nozzle set
The 3Doodler comes with an approx. 0.8 mm round nozzle, with which you can already do a lot. These six nozzles in other sizes and shapes offer even more possibilities for three-dimensional drawing and crafting. So you can realize all your ideas even better.
These new nozzles are included in the set:
- 1.5 mm: for particularly thick strands
- 1.0 mm: the paint strands are slightly thicker than with the regular nozzle
- 0.6 mm: for particularly thin strands
- Triangle: for angular instead of round paint strings, triangular in cross-section
- Square: the same, only with a square cross-section
- Ribbon: for flat ribbons
The difference of 0.2 mm to the standard nozzle (0.8 mm) may seem small, but it is clearly noticeable when printing.
The metal nozzles are screwed onto the 3Doodler to ensure that everything sits firmly and securely on the device. This is very easy with the corresponding handle, which has a hexagon socket at the front into which the nozzles fit exactly. Important is that the nozzles are always inserted straight and completely so that no plastic can escape sideways!
Note: Even if you always use the same nozzle, the remaining plastic rod should always be removed. We also recommend removing the nozzles after use, as they could stick to the remaining plastic when they cool down, making them more difficult to remove later.
The nozzles that are not in use can simply be stored in the handle itself by unscrewing the blue cap. This way you won't lose any nozzles and always have all of them to hand when it's time to doodle. :)
Now there are no more excuses, with the 3Doodler really anything is possible, from a small gimmick to a complicated model. If you need a few more ideas, here you can find the projects of other doodlers. :)
